Monday, December 8, 2008

Gingerbread Man of My Dreams

And now for the Theta Christmas tree topper.
First I'll tell you the supplies and then I'll tell you the process... This is an
old school crafting post, one that actually offers advice on making the above
pictured tree topper.
  • brown foam
  • six green and red buttons
  • two packages of white brick-a-brack trim, medium thickness
  • scissors
  • craft glue
  • a hot glue gun with glue sticks
  • brown thread
  • a sewing machine or the will power to sew quite a lot by hand
  • lots and lots of straight pins
  • cheap cotton cloth, appropriately ginger colored
  • several examples of other gingerbread men, to use for inspiration
  • something to use as eyeballs, four of 'em
  • a brown crayon
  • red paint, to use as a mouth.

Take yer brown crayon and your brown foam, draw a gingerbread man. Cut out the gingerbread man from foam. I used two pieces of foam and cut them both out so that I could give, as a coworker called it, the poor final product a Christmas-tree enema. I took a picture to explain what I'm talking about. So next you take your fabric and lay it out on a flat surface folded in half so that it is two pieces of fabric thick and place the gingerbread man cutout on top. Trace around the man, leaving about an inch and a half border. Cut out the fabric so that you have two pieces of gingerbread man looking fabric. Now it's time to put the foam bit on the inside of the fabric pieces and pin all around him. Sew him up, leaving a space between his legs so that you can take out the foam and eventually install him on top of a Christmas tree (thus the enema comment). Turn the sewn product inside out so that the hem is on the inside, replace the foam inside to give him a taut look and feel. Real cookies are never wrinkled. Not to get naughty here, but you'll need to glue the fabric from between his legs to the foam, so that he is complete, all around. Next you'll add the brick brack using craft glue (or hot glue depending on your personal preferences). I left about a quarter inch on the outside of the brick brack, but again, it's up to you. Add your buttons for his tummy and your sparkly eyes and then paint on a mouth. I added a gross grain ribbon sash around his neck to make him extra pretty. My guy was double sided for a tree to be displayed in the round, so I had to do the last several steps twice. Stick a tree up his bum and you're done!

I've uploaded lots of pictures to show off the project (and my somewhat messy process).

So here's the guy all covered in pins. And you get a good idea of the supplies I used to create the man. Note the shoe in the top left of the photo and the trash on the floor. I was so messy the night I made this dude!
So I needed brown thread. I bought some when I bought the fabric only to come home and find almost an identical color thread in my sewing box. Think of all the gingerbread men I could sew with these two spools.
This is my dude when I'd sewn him up. Notice how snug his cover his to the foam underneath. Also notice that I cut my finger while doing this craft. Whoops. Suffer for the love of the craft.
And here I've added brick brack but have yet to add the face. I really liked the way it looked at this stage in the process.

And finally... here we see the backside of the tree. My craft on display at the Dallas Country Club -- what a proud moment for this crafter!

1 comment:

  1. Hey Hilary! Jason gave me the address for your blog. I'm not the craftiest, but I nevertheless enjoy reading, especially when gingerbread men are involved:) Anyway, I just started a blog recently too--Jason said he gave you the address--I'm still figuring it out but hope you'll check it out. Hope you are well, Merry Christmas!

    ReplyDelete